Z-Axis Precision Motorized Lab Jack Optical Fine Adjustment Displacement Stage
The motorized lab jack is driven by ball screw, which has high load capacity, greatly reduced return clearance, and higher movement accuracy and positioning accuracy. The main material is high-quality stainless steel, guided by four linear bearing guides to ensure smooth operation during high load movement. There are three specifications for the product travel range: 6mm/8mm/10mm, which can meet most travel requirements. This motorized lab jack is especially suitable for precision optical experiment, precision positioning, precision machining and other fields with small load capacity and small stroke.
Product specification of motorized lab jack
| Model Number | PT-GZ40 | PT-GZ60 | PT-GZ80 |
| Mechanical Specification | Platform Size | 40×40mm | 60×60mm | 80×80mm |
| Travel | 6mm | 8mm | 10mm |
| Transmission Mode | Belt+ball screw Φ6,Lead 1mm |
| Track | Linear ball-guided |
| Slide Material / Surface Treatment | Steel/electroless nickel plating |
| Weight | 0.6kg | 1.0kg | 1.5kg |
| Coupling | No coupler configured |
| Accuracy Class | N:Standard |
| Outgoing Direction | N:General outgoing line |
| Accuracy Specification | Resolution | 5μm/2.5μm | 2.5μm/1.25μm |
| Max Speed (Full Step) | 12mm/sec | 6mm/sec |
| One-Way Positioning Accuracy | 30μm |
| Repeated Positioning Accuracy | ±5μm |
| Load Capacity | 3Kgf | 5Kgf |
| Idling | 5μm |
| Parallelism | 50μm |
| Motion Straigheness | 4μm |
| Motion Parallelism | 20μm |
| Electrical Specification | Motor | Type/Output Shaft Type | 2-phase step/28 double output shaft |
| Brand/Model | (Optional) |
| Driver | Brand/Model | (Optional) |
| Connector | Slide Side Joint | 15Pin Male Connector D-SUB |
| Controller Side joint | 15Pin Female connector D-SUB(Optional) |
| Sensor | Travel Origin Sensor | Photoelectric Sensor EE-SX4134 |
| Travel Limit Sensor |
| Supply Voltage | 24V±10% |
| Control Output | NPN Idle Collector Output Below 24V 8mA |
| Output Control | Detection (induction): output transistor OFF (non-conductive) |
◎ The standard joint type of the product is D-SUB.
◎ If the outgoing line of the organization needs to be HRS, please inform separately.
◎ General outgoing line is standard, regardless of left and right outgoing lines.
Remarks:
The above is an economical configuration, including one 35cm long ordinary cable, one D-SUB15pin male connector, one Xinnong 28 stepper motor, and one photoelectric switch. The basic parameters are designed and produced according to the standard travel. If the customer has other technical requirements, the specific price shall be subject to the actual offer.
Features of high-precision motorized lab jack
• It adopts belt+ball screw drive, suitable for places with small stroke and light load.
Linear ball guide rail guide, high movement accuracy and smooth operation.
• Various travel specifications can be selected as 6mm, 8mm and 10mm.
• Two-phase stepping motor drive, large torque, strong load capacity, stable and reliable.
Troubleshooting policy of motorized lab jack
1. If the motor and mechanism are hit by external force, please check whether the smoothness of the screw will affect the operation of the sliding table.
2. Do not arbitrarily adjust the left and right limit positions and the original position to avoid impact and affect the warranty.
3. The cable and socket of limit switch shall be firm to prevent loosening.
4. Do not loosen the coupling and transmission structure at will to avoid affecting the accuracy and warranty.
5. In case of any abnormal noise and vibration during the operation of the machine, please cut off the power before checking.
Product Tags:
|
|
Z Axis Precision Motorized Lab Jack Optical Fine Adjustment Displacement Stage Images
|
